Edit All Responding Units

  1. Access responding units record in one of these ways.

    1. From the File menu, select the NFIRS 5.0 Incident Reporting selection, NFIRS 5.0 Incident Reports option, then select the incident record.
    2. Click Units & Personnel.
    1. From the File menu, select the EMS/Search & Rescue Reporting selection, EMS/Search & Rescue Reports option, then select the incident record.
    2. Click Units & Personnel.

  2. Press Open All.

    The Unit Response Detail form is displayed. All units added for the incident are listed in the lower right area of the Basic section, and if necessary an additional unit can be added by pressing + and a listed unit can be removed by highlighting the unit and pressing -.

  3. Change values as needed.
  4. Press Apply to All, check the fields with values that should be applied to all units, then press OK.
  5. Save and close.